- Five row configuration for trash clearance
- Good under-frame clearance
- Fitted with spring adjustable 580 tyne assemblies
- Tyne breakout adjustable up to 75kg (165lb)
- Tyne spacing, 160mm (6¼”)
- Walking beam axles, fitted with high floatation tyres
Fitted with the 580 edge-on tynes at 160mm (6 ¼”) row spacing, sizes range from 8.5m (27’) to 13.6m (44’ 3”). Can be used for secondary tillage and sowing in conjunction with an Airseeder. The five row configuration for good trash clearance and minimal ridging.
The 5-160 Seeder Bar is ideal for secondary tillage and best suited to lighter soil conditions that do not require the weight of a heavier machine. Being lighter to pull means there are the benefits of fuel cost savings.
Proven 630 edge-on tyne assemblies give excellent digging ability and under-frame clearance.
Available in basic 53, 69 and 85 tyne models.
This machine has a five row 75mm x 75mm frame, dual walking wheels on the centre section and wings (69t and 85t models, centre only), which are fitted with 10″ tyres. The machine features four, series-connected phasing wheel cylinders. Wheels are positioned within the frame, on walking beam axles for good depth control across the full width of the implement.
580 Tyne Assembly
The 5-160 Cultivator is fitted with the 580 tyne assembly. Features of this assembly include, 16mm or 13mm diameter springs, a spring steel 16x40mm shank with single bolt hole foot, large 25mm diameter greasable pivot pin with a hardened single bush, heavy duty clamp and for convenience, one spanner size adjusts spring pressure and clamp nuts. The straight leading edge shank has good under-frame clearance to promote efficient trash flow.
Note: Points not supplied as standard.
|8.5m (27’ 6”)||53||160mm (6 ¼”)|
|11.0m (35’ 10”)||69||160mm (6 ¼”)|
|13.6m (43’ 3”)||85||160mm (6 ¼”)|
|2 tyne extension EOT|
|4 tyne extension EOT|
|8 tyne extension EOT|
|Spring Tooth Harrows|
|53 Tyne||69 Tyne||85 Tyne|
|Width of Cut||8.5m (27’ 6”)||11.0m (35’ 10”)||13.6m (43’ 3”)|
|Power Requirements||65-100kW (90-135hp)||85-120kW (110-160hp)||105-155kW (135-210hp)|
|Weight||2820kg (6200lb)||3300kg (7250lb)||3730kg (8200lb)|
|Transport Width||6.12m (19′ 10″)||6.12m (19′ 10″)||6.12m (19′ 10″)|
|Transport Clearance||205mm (8 1/8″)||205mm (8 1/8″)||205mm (8 1/8″)|
|Transport Height||2.72m (8′ 9″)||4.0m (13′)||5.3m (17′ 3″)|
|Wheels||Dual walking wheels on centre, single on wings||Dual walking wheels on centre and wings||Dual walking wheels on centre and wings|
|Row Spacing||160mm (6 ¼”)|
|Tyne assemblies||580 Tyne Assemblies|
|Tyres||10.00 x 16 x 6 ply tyres, 9.00 x 16 x 6ply available on request.|
|Tyne breakaway||16mm dia spring adjustable to 75kg (165lb)
13mm dia spring adjustable to 50kg (110lb)
|Maximum Working Depth||150mm (6″)|
|Tyne foot||2 x V” bolt holes @ 45mm centres|
|Depth control||Four (4) series connected phasing cylinders|
|Under-frame Clearance||580mm (23″)|