Features
Essentials
- Five row configuration for trash clearance
- Good under-frame clearance
- Fitted with spring adjustable 630 tyne assemblies
- Tyne breakout adjustable up to 158kg (350lb)
- 2 bolt hole tyne foot, accepts a wide range of points
- Walking beam axles, fitted with high floatation tyres
Overview
Series 5 is fitted with the 630 high breakout edge-on tynes, a big upgrade from the older 580 spring tynes of the earlier 5-160 variant. Machines can be specified in 3 different tyne spacings (7″, 9″ and 10″) and frame sizes ranging from 8.5m (27’) up to 14.9m (48’10”) with extensions. The bar can be used for cultivating, secondary tillage and sowing in conjunction with an airseeder.
This unit is best suited to lighter soil conditions that do not require the weight of a heavier machine. Being lighter to pull and mechanically simpler means there are great on-going fuel cost and maintenance savings to be had from this proven platform.
Construction
This machine has a five row 75mm x 75mm frame, dual walking wheels on the centre section and wings. (33t model, centre only), which are fitted with 10.00 tyres (9.00 optional). Depth control is via series-connected hydraulic wheel lift cylinders.
630 Tyne Assembly
All Series 5 machines are now fitted with the 350lb breakout force 630 Tyne assembly, a big upgrade over the previous 580 Tyne. Features of this assembly include, dual springs, a spring steel 25x50mm shank with 2 bolt hole foot, large 25mm diameter greasable pivot pin with a hardened single bush, heavy duty clamp and for convenience, one spanner size adjusts spring pressure and clamp nuts. The straight leading edge shank has good under-frame clearance to promote efficient trash flow.
The 630 assembly has a tyne breakout force adjustable up to 158kg (350lb).
Note: Points not supplied as standard. See options below.
Models
| Model/Width | 178mm (7”) | 230mm (9”) | 250mm (10”) |
|---|---|---|---|
| 8.5m (27’ 6”) | 47t | 37t | 33t |
| 11.0m (35’ 10”) | 61t | 47t | 43t |
| 13.6m (43’ 3”) | 59t | 53t |
Options and Accessories
| Part Number | Description |
|---|---|
| 2 tyne extension EOT | |
| 4 tyne extension EOT | |
| 8 tyne extension EOT | |
| 44127 | 630 Knife Points |
| 44126 | 630 Seeder Points |
| Spring Tooth Harrows | |
| Airseeder Kits |
Specifications
| All Models | |
|---|---|
| Frame | 5 Row |
| Hitch | 3.6m (11’10”) |
| Tyne assemblies | 630 HD Tyne Assemblies |
| Wheel equipment | 10.00 x 16 x 6 ply duals on centre and wings – Small wing model. 9.00 x 16 x 6ply – Available on request. |
| Tyne breakaway | 630 Edge-on adjustable to 158kg (350lb) |
| Tyne foot | 2 x V” bolt holes @ 45mm centres |
| Depth control | Four (4) series connected phasing cylinders |
| Packed Length | 4970mm |
| Packed Width | 2700mm |
| Packed Height | 2290mm |