5-250 Seeder Bar

5-250 Seeder Bar

The 5-250 Seeder Bar is an affordable alternative, more suited to lighter soil conditions in conventional and minimum till farming practices.

Fitted with the 630 high breakout edge-on tyne at 250mm (9.8”) row spacing, sizes range from 8.5m (27’) to 15m (48’10”). Can be used for secondary tillage and sowing in conjunction with an Airseeder.


  • Five row configuration for trash clearance
  • Good under-frame clearance
  • Fitted with spring adjustable 630 tyne assembly
  • Tyne breakout adjustable up to 158kgs (350lbs)
  • Tyne spacing, 250mm (9.8”)
  • 2 bolt hole tyne foot, accepts a wide range of points
  • Walking beam axles, fitted with high floatation tyres
  • Lighter to pull than most other options available

The 5-250 Seeder Bar is ideal for secondary tillage and best
suited to lighter soil conditions that do not require the weight
of a heavier machine. Being lighter to pull means there are
the benefits of fuel cost savings.
This machine has a five row 75mm x 75mm frame, dual walk-
ing wheels on the centre section and wings. (33t model, cen-
tre only), which are fitted with 10.00 tyres. (9.00 optional)
The tyne assemblies are spaced at 250mm (9.8”) and depth
control is via series connected hydraulic wheel lift cylinders.


The 5-250 Seeder Bar is fitted with the 630 tyne assembly. Features of this assembly include, dual springs, a spring steel 25x50mm shank with 2 bolt hole foot, large 25mm diameter greasable pivot pin with a hardened single bush, heavy duty clamp and for convenience, one spanner size adjusts spring pressure and clamp nuts. The straight leading edge shank has good underframe clearance to promote efficient trash flow.

The 630 assembly has a tyne breakout force adjustable up to 158kgs (350lbs).


Width of cut 8.25m (27’), 11.00m (35’ 4”), 13.6m (43’5”)
Number of tynes 33 tynes, 43 tynes, 53 tynes
Tyne spacing 250mm (9.8”)
Frame Three section frame, greasable hardened steel pins and bushes in hinges and wheel arm pivots
Tyne mounts 5 rows, 75mm (3”) square RHS
Tyne assemblies ‘630’ tyne assembly, edge-on 50mm x 25mm section , heat treated high carbon steel
Tyne breakout Adjustable up to 158kgs (350lbs)
Tyne foot Two (2), 1/2” bolt holes @ 45mm centres
Under-frame clearance 614mm
Hitch length 4.0m(13’1”)
Depth control Four (4) self phasing, series connected, hydraulic wheel lift cylinders; (4 1/4” x 8” master with depth stop)
Wheel equipment Walking wheel, duals on centre & wings. (33 tyne model centre only), fitted with 10.00 x 16 x 6 ply. Optional 9.00 x 16 x 6 ply
Transport height 2.72m (8’9”), 4.0m (13’), 5.3m (17’3”)
Transport clearance 193mm (7.6”)
Transport width 6.12mm (19’10”)
Optional Equipment 2, 4 and 8 tyne extensions
Spring tooth harrows
Airseeder kit

Download Product Brochure PDF

Due to our policy of continuing research, specifications are subject to change without prior notice.